TBB Power Co., Ltd.
PURSUIT OF PERFECTION
Add to Cart
ALL- IN - ONE Hybrid solar inverter charger for home 12V35A1000W with Temperature compensation
Energier Apollo charge controller can be used in multiple applications. It can compose power backup system, or with a quick setting, it can compose a simple solar hybrid system either with grid or diesel generators.
PWM version 1.2KW-1.7KW
MPPT version 2KW-4KW
System work mode
When Energier Apollo is set to “Power Backup Mode”, AC grid will work as the 1st priority energy source. When the AC input is not present,
it will switch to inverter mode automatically.
By dip switch 8, it can be set to enable/disable charging the battery. Please refer Chapter 4.8 for details. We assume the setting is “Enable”
in this manual.
Smart Charging
The built-in smart battery charger automatically starts up when qualified AC power is presented either from grid or generator, charging
the battery connected.
Powerful
The built-in charger of Energier Apollo was designed with high power, which can quickly charge a battery within 6-8hrs.
Multi stage sophisticated charging algorithm for lead acid battery
Fitted with multistage charging algorithm (bulk-absorption-float-recycle), the built-in charger of the Energier Apollo is designed to charge batteries quickly and fully. Microprocessor controlled charging algorithm with variable absorption charging times guarantees the optimal
charging for batteries of different discharged state.
Specifications
INVERTER
Three Working modes: Weak grid/Solar hybrid/ Solar energy storage
Nominal Voltage: 12VDC
Power 30mins @25℃(VA):1000
Power 30mins @25℃(W):900
Cont. power @25℃( VA) 【1】:800
Cont. power @25℃( W):750
Cont. power @40℃( W):700
Output voltage【2】:230 VAC / 110 VAC ± 2%
Output frequency :50 / 60 Hz ± 0.1%
Cos φ:0.9-1
Overload Capability【3】:>125% 60S
Overload Capability【3】:>150% 20S
Surge:300%
Efficiency (MAX.):90.5%
Bypass range: Weak Grid 168 VAC - 276 VAC / 84 VAC -138 VAC
Bypass range: Standard 184 VAC - 264 VAC / 92 VAC -132 VAC
THD 【4】:<3%
CHARGER
Nominal Output Voltage:12VDC
Max Output current (A) - adjustable:35A
AC Input range: Weak Grid 168 VAC - 264 VAC / 84 VAC -132 VAC
AC Input range: Standard 184 VAC - 264 VAC / 92 VAC -132 VAC
Battery types:AGM / GEL(OPzV) / LFP / Flooded
Temperature compensation:-4mV / ℃ / cell
SOLAR CHARGE CONTROLLER
Max PV open circuit voltage (Voc):25 VDC
Recommended PV (Vmpp):16-19VDC
Current max:50A
PV Fuse:40AX2
PV input terminal:MC4X2
Other Data
Typical transfer time: 8ms
DC Fuse 40AX4
Transfer switch 16A
Dimension (mm) (max): 470×233×95
Enclosure:Steel with powder paint
Net Weight (KGs):10.5
Safety EN62109-1 , EN62109-2
EMC: EN61000-3-2,EN61000-3-3,EN61000-6-1,EN61000-6-3
Remarks:
【1】None linear load, crest factor 3:1
【2】Output voltage: 220 VAC / 60Hz for Philippines
【3】Base on Cont. power @25℃
【4】linear load, crest factor 1.4:1
Accessory( Optinal)
- RCH
- Cyber
Monitoring : with all real time data Battery State of Charge
Digiital Shun: Digital shunt features microprocessor controlled combined with high resolution measuring system for battery voltage and charge/discharge current. With built in software,it can Apart from discharging and charging, multiple other factors are considered including battery size, age ratio of battery etc. With shunt,
Thanks for choosing Energier Apollo, of which can be used to compose various hybrid. Please don't not hesitate to contact with us if you have any questions. We are online 24hours.